Passenger and Crew Count

Introduction/Additional information: 

The purpose of the Passenger and Crew Count message is for a ship to report the number of persons on board separated into passengers and crew, e.g., upon request by a competent authority.

 

Usage notes

  1. This message is addressed only; sent to the competent authority requesting the information.
  2. The total number of people onboard the vessel is the sum of the crew (anyone not a passenger) and passenger numbers.
  3. The Message Linkage ID can be used to link additional text (e.g., a separate text message). However, the same source MMSI needs to be included in both the Passenger and Crew Count and Linked Text messages).
  4. The UTC day and time fields reflect the time the message is prepared; the number of crew and passengers in the message shall be whatever they were at this time.
  5. If a message is received with a more recent day/time, then the older message should be discarded and the newer data used.
Registrant: 
USCG RDC
Message number: 
6
DAC: 
367
FI: 
16
State: 
draft
Used by: 
USCG RDC
Number of slots (max): 
1
Reporting Rate: 
As needed
Technical point of contact: 

Submit any suggested changes to: gwjohnson@alionscience.com

Details: 

 

Parameter

# of Bits

Description

Standard Message Header

Message ID

6

Identifier for Message 6; Set to 6 addressed, acknowledgement needed.

Repeat Indicator

2

Used by the repeater to indicate how many times a message has been repeated. (See ITU-R M.1371-3, Annex 2, § 4.6.1). 0-3; 0 = default; 3 = do not repeat any more. Set to 0 (default).

Source MMSI

30

MMSI number of source station. Varies according to the transmitter ID.

Sequence number

2

0 – 3; refer to ITU-R M.1371-3, Annex 2, § 5.3.1.

Destination MMSI

30

MMSI number of destination station.

Retransmit Flag

1

Retransmit Flag. 0 = no retransmission = default; 1 = retransmitted.

Spare

1

Not used. Set to zero.

Binary Data

Designated Area Code

10

Designated area code (DAC). (See Rec. ITU-R M.1371-3 § 2.1, Annex 5). Set to 367 (US).

Function Identifier

6

Function identifier. Set to 16.

Application Data

Message Version

6

Sequential number used to indicate the message version in steps of 1. Range from 1 to 63. Value of 0 means test message. Set to 1.

Message Linkage ID

10

A source specific running number, unique across all binary messages equipped with Message Linkage ID. Used to link additional information to the message by a Text Description message. The Message Linkage ID and the first six digits of the source MMSI uniquely identify the sent message.

1 – 1,023; 0 = not available = default.

Timestamp for currency of POB data

UTC day

5

UTC day of the POB data currency.

1 – 31; 0 = UTC day not available = default.

UTC hour

5

UTC hour of the POB data currency.

0 – 23; 24 = UTC hour not available = default; 
25 – 31 (reserved for future use).

UTC minute

6

UTC minute of the POB data currency.

0 – 59; 60 = UTC minute not available = default; 
61 – 63  (reserved for future use.)

Total crew members

13

Number of persons on board other than passengers:

0 = not available or unknown= default; 1 – 8,191 crew; 8,192 = >8,192 crew.

Total passengers

15

Total number of passengers onboard:

0 = not available or unknown= default; 1 – 32,767; 32,768 = >32,768 passengers.

Additional Vessel
Type Information

4

This parameter provides additional information about the vessel type.

0 = Unknown or not in list= default; 1 = Ferry vessel (people and vehicles);

2 = Ferry vessel (people only); 3 = Cruise ship; 4 = Excursion vessel;

5-15 = Reserved for future use.

Total bits

152

1 Slot Binary Message